Adjustable Aperture Sights
  for the Ruger^® 10/22^® Rifle

AS SEEN ON

       
               Model TSR100                                 Model TSR200                                
     Dual leaf flip apertures                      Single elevation adjustable aperture
     0-2 is short range aperture
                (Scale lines were colored for illustration purposes) 

FEATURES:                                    PDF File of Assembly Instructions - Click HERE.

• 8" Longer Sighting Radius
• Rear Sight Base mounts solidly to the rear of the receiver utilizing the existing tapped scope base holes.
• TSR100 comes standard with dual apertures (.062) and is compatible with M16/AR15 apertures.
• TSR200 allows for additional elevation adjustment at the rear sight.
• Uses incremental windage adjustment with rugged detent locking.
• Front sight tower comes standard with an incremental detent adjustable AR15 type post designed for the AR15. This gives the shooter a wide variety of post designs.

These sights will also fit the old model Ruger 44 Magnum Carbine.

TSR100 Aperture Sight for Ruger 10/22
$59.00 (includes front and rear sight)

TS220 Elevation Aperture for Ruger 10/22
$19.00 Each

Barrel adaptor installed with TSR front sight tower.

TS157 .920 Barrel Dovetail Adaptor allows the use of TSR100 & TSR200 sighting systems to be used with .920 target barrel equipped 10/22s. The adaptor is a slip fit over the end of the barrel and is locked in place with thread lock compound. The adaptor is machined from 4140 alloy steel with manganese phosphate finish and has a 3/8" dovetail.

TS157 .920 Barrel Dovetail Adaptor for Ruger 10/22
$15.00 Each
 

Item #TS00182 - Extended National Match Front Post
$5.00 Each

        * Taller post for shooting at shorter ranges.
* .050 inches taller than standard post.
* Comes Standard on TSR200 sight for Ruger 10/22.

 Item #TSR110   
$22.00 Each

REPLACEMENT PART
Item #TSR110 - Front Sight Tower Assembly for Ruger - Steel

     * Replacement Front Tower Assembly for TSR100. This includes the base, standard target post, spring & detent,
        and mounting hardware.

 Item #TSR210  
$22.00 Each

REPLACEMENT PART
Item #TSR210 - Front Sight Tower Assembly for Ruger - Steel

     * Replacement Front Tower Assembly for TSR200. This includes the base, extended target post
         (.050 inches taller than standard post) spring & detent, and mounting hardware.

Item #TS00139
$15.00 Each

     * Replacement Tower for TSR100 & TSR200 front assembly.
       (This is the base including mounting hardware. This DOES NOT include target post, spring & detent).
       

Item #TS00139A
$12.00 Each

     * Replacement Tower for TSR100 & TSR200 front assembly.  (This is just the base).
       

See Accessory Page for these adjustment tools.

If you do not see the top and left frames, please click here.

Ruger Sights - Testimonials Ruger Sights - SKS Sights  -  Testimonials SKS
 Accessories  -  Order  -  F.A.Q.  -  Home